Online Tool Store
Wielafstand-calculator
Bereken wielafstand, overhang en spelingen om te verifiëren passenden op ophanging en remmen van voertuigen.
🔒 Deze tool werkt volledig in je browser. Je bestanden worden nooit naar een server geüpload.
Unit & Converters
Wheel Offset Calculator
Frontend preview — no upload or external service.
Fitment change
Going from 8.5J ET35 to 9.5J ET25 pushes the outer edge 22.7 mm further out and the inner edge 2.7 mm further in — arch clearance is the constraint, not the strut.
How Wielafstand-calculator works
- Open Wielafstand-calculator and review the example state before entering your own values.
- Enter or select the information needed for Wielafstand-calculator.
- Review the result and adjust the inputs if you want to compare another case.
Compare a new wheel's offset and width against your current setup to see how far the face and inner edge move, before anything is ordered. The interactive workspace runs in your browser, so you can review the result without creating an account.
FAQ
What is Wielafstand-calculator used for?
Compare a new wheel's offset and width against your current setup to see how far the face and inner edge move, before anything is ordered.
Do I need an account?
No. The tool is available directly in the browser without an account or sign-up.
What should I do if the result looks unexpected?
Check the entered values and compare them with the guidance shown in Wielafstand-calculator. Use the result as a planning aid and verify important decisions independently.