Online Tool Store
Raspberry Pi GPIO পিনআউট
Raspberry Pi GPIO পিনআউট, SPI, I2C এবং সিরিয়াল সংযোগের জন্য ইন্টারঅ্যাক্টিভ রেফারেন্স হার্ডওয়্যার প্রকল্পের জন্য।
🔒 এই টুলটি সম্পূর্ণভাবে আপনার ব্রাউজারে চলে। আপনার ফাইল কখনও সার্ভারে আপলোড করা হয় না।
Developer
Raspberry Pi GPIO Pinout
Frontend preview — no upload or external service.
Pinout reference
Pin 3 = BCM 2 = SDA1, pin 5 = BCM 3 = SCL1, pins 1 and 17 are 3V3, pins 2 and 4 are 5V, and pins 6, 9, 14, 20, 25, 30, 34, 39 are ground.
How Raspberry Pi GPIO পিনআউট works
- Open Raspberry Pi GPIO পিনআউট and review the example state before entering your own values.
- Enter or select the information needed for Raspberry Pi GPIO পিনআউট.
- Review the result and adjust the inputs if you want to compare another case.
Look up the 40-pin Raspberry Pi header: physical pin numbers, BCM names, power rails, and which pins carry I2C, SPI, and UART. The interactive workspace runs in your browser, so you can review the result without creating an account.
FAQ
What is Raspberry Pi GPIO পিনআউট used for?
Look up the 40-pin Raspberry Pi header: physical pin numbers, BCM names, power rails, and which pins carry I2C, SPI, and UART.
Do I need an account?
No. The tool is available directly in the browser without an account or sign-up.
What should I do if the result looks unexpected?
Check the entered values and compare them with the guidance shown in Raspberry Pi GPIO পিনআউট. Use the result as a planning aid and verify important decisions independently.